In this guide I will show you how to make an anchor.
Overview
Table of Contents
In this guide I will show you how to make an anchor to hold you still in even the windiest days.
There are 4 winch sizes:
Small
Medium
Large
Huge
Use at least medium, because small does not have all the inputs you need.
Placing your winch
I will be using a large winch for this example. Each winch has a certain length that it can reach.
You can place your anchor anywhere, but I recommend about the middle of your ship at the bottom.

Making the anchor
Make your anchor. You need an Electric Cable Anchor and a Mag All.


Now open the selection grid. And select your whole anchor.

Now click cut and then paste it in the exact same spot. The anchor is now a separate object. When you bring your cursor over your ship, the anchor will turn gray.
Now open logic and go to ropes. Connect a rope between the Electric Cable Anchor and the winch.

Controls
For this you will need 2 Push Buttons, and 1 Toggle button.
Name 1 Push Button up, and the other one down. Name the Toggle Button magnet.
Here is my layout:
D : Down
M : Magnet
U : Up

Now let’s move on to the electricity.
Electricity
Connect electricity from the Electric Cable Anchor to the Magnet.
Once the winch has power connected to it, the anchor will get power through the rope you attached earlier.
Now let’s do the logic.
Logic
Instructions:
Connect the On/Off Output from the Electric Cable Anchor to the Magnet Toggle on the magnet
Connect the On/Off Output from the winch to the On/Off Input on the Electric Cable Anchor
Connect the On/Off Output from the toggle button to the On/Off Input on the Winch
Connect the Up button to the Up input on the winch
Connect the Down button to the Down input on the winch

The End
Now you have a working anchor that will hold you still even in the windiest times.

If you have any questions feel free to comment. I will get back to you as soon as I can.
Remember:
No matter what
KEEP DANCING STRONG! EVEN DURING THE WINDIEST TIMES!
This is it guys!! I am sure that you will love Stormworks: Build and Rescue How To Make An Anchor that we have shared with you. We are always open to discussion and suggestions from you. Just let us what you thought about the guide in the comment section.
Also, we would like to thank Monkeys_In_A_Bin. He is the one behind this wonderful guide.